Pembuatan Jobsheet Sinkronisasi Generator pada Mata Kuliah Mesin-Mesin Listrik

##plugins.themes.academic_pro.article.sidebar##

Published Nov 9, 2023
https://doi.org/10.24036/jpte.v4i2.333
Download
PDF
Statistic
Vol 4 No 2 (2023): Jurnal Pendidikan Teknik Elektro

##plugins.themes.academic_pro.article.main##

Teguh Aimanto Daulay
Departemen Teknik Elektro, Universitas Negeri Padang
Hansi Effendi
Departemen Teknik Elektro, Universitas Negeri Padang

Abstract

The Job sheet in this study is a practical guide that contains the tools used, the materials used, the sequence of work instructions, the results of examinations, and conclusions regarding the practices that have been carried out in the laboratory. This research was motivated by the lack of creative and innovative media as student practicum media as well as the simple appearance of job sheets and the material presented was not attractive. This study aims to develop a valid job sheet for generator synchronization in the subject of electrical machines. This study uses the type of development R&D (research and development) with a 4-D model which consists of four stages without the deployment stage, namely defining, designing, and developing. The data collection instrument uses an evaluation sheet in the form of a questionnaire for validity. Job sheet validity test from material expert 1 is very good and material expert 2 is very good ​​with very appropriate information. The validation results from Media Expert 1 were good and Media Expert 2 was very good with very appropriate information. It can be concluded that this generator synchronization job sheet is very feasible to use in practice because it has been declared very valid.

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

[1] Penjelasan Atas Undang-Undang Republik Indonesia No. 10, “Mengenai Mencerdaskan Kehidupan Bangsa,” Jakarta, 2012.
[2] A. Ahyanuardi, O. Candra, D. T. P. Yanto, and A. A. A. Bata, “The Development of 1 Phase Induction Motor Training Kits,” International Journal of Scientific & Technology Research, vol. 9, no. 08, pp. 541–545, 2020.
[3] Anshar, Chairul Nazalul, 2021. Pengembangan Jobsheet Berbasis Produk Pada Mata Kuliah Praktek Rangkaian Elektronika Program Studi Teknik Elektro Industri Fakultas Teknik Universitas Negeri Padang. Ekasakti Engineering Journal (E-EJ), Volume 1, Issue 1A. Jaedun, Sutarto, and Ikhwanuddin, “Model Pendidikan Karakter Di SMK Melalui Program Pengembangan Diri Dan Kultur Sekolah,” J. Pendidik. Teknol. dan Kejuru., vol. 22, no. 1, pp. 163–172, 2014.
[4] Putri, Sislia Laras, Pengembangan Job Sheet Praktikum Elektronika Daya. MSI Transaction on Education Vol.2, No.3, 2021.
[5] Sihite, Mislah, Peran Kepemimpinan Dalam Meningkatkan Daya Saing Perguruan Tinggi: Tinjauan Konseptual. Jurnal Ilmu Manajemen Methonomix Vol. 2, No.1, 2019.
[6] D. T. P. Yanto, M. Kabatiah, H. Zaswita, G. Giatman, and H. Effendi, “Development of Virtual Learning using Problem-Based Learning Models for Vocational Education Students,” ELINVO (Electronics, Informatics, and Vocational Education), vol. 7, no. 2, pp. 163–172, 2022, doi: 10.21831/elinvo.v7i2.52473.
[7] Chairy, Ach, Peran Kepemimpinan dalam Penjaminan Mutu Perguruan Tinggi Keagamaan Islam Swasta. TAFAHUS: Jurnal Pengkajian Islam, Vol 1, No. 1, 2021.
[8] Sedyati, Retna Ngesti, Perguruan Tinggi Sebagai Agen Pendidikan dan Agen Pertumbuhan Ekonomi, 2022.
[9] Yuliana, Y., & Hambali, H, Pengembangan Job Sheet Praktikum sebagai Media Pembelajaran pada Mata Pelajaran Instalasi Motor Listrik. JTEV (Jurnal Teknik Elektro dan Vokasional), 6(1), 120-126, 2020.
[10] Widyanto, Aditya Sunu, Pengembangan Job sheet Rangkaian Elektronika Kelas XI Teknik Elektronika Industri. ELINVO (Electronics, Informatics, and Vocational Education) Vol.4, No.2, 2019.
[11] Arsyah, Rahmatul Husna, Perancangan Dan Pembuatan Media Pembelajaran Berbasis Android Mata Pelajaran Sistem Komputer ( Studi Kasus Kelas X TKJ SMK Adzkia Padang ). Jurnal Teknologi Dan Sistem Informasi Bisnis Vol. 1 No. 2, 2019.
[12] D. T. P. Yanto, “Praktikalitas nedia pembelajaran interaktif pada proses pembelajaran rangkaian listrik,” INVOTEK J. Inov. Vokasional dan Teknol., vol. 19, no. 1, 2019.
[13] Darmawan, T, Evaluasi Pelaksanaan Pelatihan Dasar Plc (Programmable Logic Controller) Bagi Mahasiswa Teknik Mesin Universitas Negeri Jakarta (Doctoral Dissertation, Universitas Negeri Jakarta), 2017.
[14] Mulyana, Muhammad I, Pengembangan Job Sheet Mata Pelajaran Sistem Instalasi Tata Udara. Jurnal of Mechanical Engineering Education Vol.6, No.2, 2019.
[15] D. T. P. Yanto, O. Candra, C. Dewi, H. Hastuti, and H. Zaswita, “Electric drive training kit sebagai produk inovasi media pembelajaran praktikum mahasiswa pendidikan vokasi: Analisis uji praktikalitas,” JINoP (Jurnal Inovasi Pembelajaran), vol. 8, no. 1, May 2022, doi: 10.22219/jinop.v8i1.19676.
[16] Syahril, S, Penerapan Job Sheet Lengkap Mata Kuliah Pemesinan Mahasiswa Angkatan 2012 Jurusan Teknik Mesin FT UNP, 2012.
[17] Trianto, Model Pembelajaran Terpadu. Bumi Aksara, 2013.
[18] O. Candra and D. T. P. Yanto, “The Active Learning Strategy ‘ Everyone Is A Teacher Here ’ To Improve Studet Learning Outcomes,” Jurnal Pajar (Pendidikan dan Pengajaran), vol. 4, no. 3, pp. 616–623, 2020.
[19] Arikunto, Suharsimi, Prosedur Penelitian, Suatu Pendekatan Praktek. Jakarta: Rineka Cipta, 2009.
[20] Mustikasari, R, Pengembangan instrumen pengukuran kepuasan mahasiswa dalam peningkatan mutu layanan perguruan tinggi. Jurnal edukasi: kajian ilmu pendidikan, 5(1), 39-60, 2019.