Efektifitas Penerapan Model Project-Based Learning Berbantuan Autocad Terhadap Kualitas Pembelajaran Gambar Teknik Listrik
##plugins.themes.academic_pro.article.sidebar##
##plugins.themes.academic_pro.article.main##
Abstract
This research focuses on increasing students' interest and skills in Electrical Engineering Drawing through the application of the Project-Based Learning learning model with the support of Autocad as a tool. The aim is to overcome obstacles in conventional learning and improve the effectiveness and results of students' practice. This research uses a quasi-experiment approach with a non-equivalent control group pretest-posttest design. The subjects were students of class X TKL 1 and To measure effectiveness, the experimental group was given treatment using the Project-Based Learning learning model assisted by Autocad, while the control group applied the conventional learning model. Psychomotor results will be analyzed through a number of tests, including descriptive, t-test, classical exhaustiveness, and effect size. Based on the research results, it appears that the experimental group using the Project-Based Learning learning model assisted by Autocad had a significantly higher average score (82.89) than the control group (68.53). The standard deviation of the experimental group was also lower, indicating better consistency. In addition, the pass percentage in the experimental group (94.4%) was much higher than the control group (25%). Thus, it can be concluded that the application of this learning model is effective in improving students' practical results in the Electrical Engineering Drawing subject at SMK Negeri 1 Bukittinggi.
##plugins.themes.academic_pro.article.details##
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
[2] Lesilolo, Herly Jeanette, “Penerapan Teori Belajar Sosial Albert Bandura Dalam Proses Belajar Mengajar Di Sekolah,” KENOSIS: Jurnal Kajian Teologi 4(2):186–202, 2019, doi: 10.37196/kenosis.v4i2.67.
[3] Djamaluddin, Ahdar, and Wardana, Belajar Dan Pembelajaran, 2019.
[4] Rokiah, “Efektivitas Kebijakan Pembelajaran Jarak Jauh Masa Pandemi,” 3(2):6, 2021.
[5] Emputri, Yulira, and K. Arwizet.,“Penerapan Model Pembelajaran Project-Based Learning Untuk Meningkatkan Aktivitas dan Hasil Belajar Gambar Teknik Siswa SMK Negeri 1 Pariaman,” 1(1), 2019, doi: 10.24036/vomek.v1i1.17.
[6] Yanto, D. T. P., Dewi, C., Yuvenda, D., Aswardi, A., Hidayat, R., Muslim, M., & Zaswita, H, “Upskilling Guru Kejuruan melalui Pelatihan Kendali Motor Listrik Berbasis Variable Speed Drive,” Jurnal Pendidikan Teknik Elektro, 4(2), 497-504, 2023, doi: 10.24036/jpte.v4i2.341.
[7] Atmajayani, Risma Dwi, “Implementasi Penggunaan Aplikasi AutoCAD Dalam Meningkatkan Kompetensi Dasar Menggambar Teknik Bagi Masyarakat,” Briliant: Jurnal Riset Dan Konseptual 3(2):184, 2018, doi: 10.28926/briliant.v3i2.174.
[8] Yumizar, A, “Analisis Minat Belajar Peserta Didik Pada Pembelajaran Gambar Teknik Listrik Kelas X Di SMKN 1 Aceh Barat Daya,” 10:6, 2021.
[9] Astari, M, “Penggunaan Model Pembelajaran Make a Match Untuk Meningkatkan Hasil Belajar Peserta Didik Pada Pelajaran Menggambar Teknik Di SMK Negeri 4 Banda Aceh,” CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro 4(2):130, 2020, doi: 10.22373/crc.v4i2.7300.
[10] Pranjono, Andoko Ratri, “Efektivitas Model Pembelajaran Project-Based Learning Pada Mata Pelajaran Gambar Teknik Kelas X Program Keahlian Teknik Instalasi Tenaga Listrik Di Effectiveness Model of Project-Based Learning on the Subject of Engineering Drawingat Class X Program of Po,” Jurnal Pendidikan Teknik Mekatronika: E-Jounal Universitas Negerti Yogyakarta 4(4):307–13, 2015.
[11] D. T. P. Yanto, M. Kabatiah, H. Zaswita, G. Giatman, and H. Effendi, “Development of Virtual Learning using Problem-Based Learning Models for Vocational Education Students,” ELINVO (Electronics, Informatics, and Vocational Education), vol. 7, no. 2, pp. 163–172, 2022, doi: 10.21831/elinvo.v7i2.52473.
[12] Husein Baysha,Muh,Endah Resnandari Puji Astuti, Program Studi Teknologi Pendidikan, Fakulas Ilmu Pendidikan dan Psikologi, and Histori Artikel Abstrak, “Pengaruh Penerapan Media Tutorial Autocad Terhadap Kreativitas Belajar Siswa Kelas Xi Program Keahlian Tkj Di Smk Negeri 9 Mataram,”Lentera Pendidikan Indonesia 3(1):219–23, 2022, doi: 10.36312/lpi.v3i1.79.
[13] D. T. P. Yanto, E. Astrid, and R. Hidayat, “The achievement of four student competencies in domestic electrical installations using a project-based learning model,” in Borderless Education as a Challenge in the 5.0 Society: Proceedings of the 3rd International Conference on Educational Sciences (ICES 2019), Bandung: Routledge, 2020, p. 349.
[14] Sugiyono, Metodologi Penelitian Kuantitatif, Kualitatif dan R & D. Bandung: Alfabeta, 2013.
[15] B. Suryosubroto, Proses Belajar Mengajar di Sekolah. Jakarta : Rineka Cipta, 2009.
[16] F. Eliza, S. Suriyadi, and D. T. P. Yanto, “Peningkatan Kompetensi Psikomotor Siswa Melalui Model Pembelajaran Project Based Learning ( PjBL ) di SMKN 5 Padang : PDS Project,” INVOTEK: Jurnal Inovasi Vokasional dan Teknologi, vol. 19, no. 2, pp. 58–66, 2019, doi: https://doi.org/10.24036/invotek.v19i2.427.
[17] Fitri, A., & Usmeldi, U, “Efektivitas Project-Based Learning dalam Meningkatkan Kompetensi Siswa pada Pelajaran Instalasi Penerangan Listrik,”Jurnal Pendidikan Teknik Elektro, 3(2), 142-148, 2022, doi: 10.24036/jpte.v3i2.212.
[18] Dinantika, Haza Kurnia, Eko Suyanto, and I. Dewa Putu Nyeneng, “Pengaruh Penerapan Model Pembelajaran Project-Based Learning Terhadap Kreativitas Siswa Pada Materi Energi Terbarukan,” Titian Ilmu: Jurnal Ilmiah Multi Sciences 11(2):73–80, 2019, doi: 10.30599/jti.v11i2.473.
[19] Gunawan, Ardiyanto, and Rofiq Zainur, “Peningkatan Prestasi Belajar Siswa Pada Mata Pelajaran Gambar Teknik Melalui Penerapan Strategi Pembelajaran Project-Based Learning,” Jurnal Pendidikan Vokasional Teknik Mesin UNY 6(1):11–20, 2018, doi: 10.21831/teknik%20mesin.v6i1.10430.