Analisis Uji Kelayakan Penerapan Media Pembelajaran Instalasi Motor Listrik Berbasis Augmented Reality
##plugins.themes.academic_pro.article.sidebar##
##plugins.themes.academic_pro.article.main##
Abstract
Electric motor installation learning in Vocational High School (SMK) is often problematic because students have not been able to adapt to the self-directed learning system implemented by teachers. In addition, the media used in the self-learning process is still less effective, because it only uses learning modules. Therefore, students have difficulty in understanding the subject matter of the installation of electric motors. The purpose of this research is to create Learning media based on Augmented Reality that is feasible for electric motor installation subjects. Developed learning media are equipped with manuals and markers. This research uses Research and Development (R & D) method using a 4-D model through four stages namely stage I (define), stage II (design), stage III (develop), and stage IV (disseminate). Learning media based on AR was tested on 28 students of SMK Negeri 1 Padang at grade XI TITL A and 29 students at grade XI TITL B. The results of the average feasibility test of grade XI TITL A and grade XI TITL B were 86.63% in the highest feasible category.
##plugins.themes.academic_pro.article.details##
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
[2] J. J. González, C., Vallejo, D., Albusac, J. A., & Castro, Augmented Reality. A Practical Approach With ARToolkit And Blender. Ciudad Real: Identic, 2013.
[3] J. Bacca, S. Baldiris, R. Fabregat, S. Graf, and Kinshuk, “Augmented Reality Trends In Education: A Systematic Review Of Research And Applications,” Educ. Technol. Soc., vol. 17, no. 4, pp. 133–149, 2014.
[4] S. K. Babu, S. Krishna, R. Unnikrishnan, and R. R. Bhavani, “Virtual Reality Learning Environments For Vocational Education : A Comparison Study With Conventional Instructional Media On Knowledge Retention,” 2018 IEEE 18th Int. Conf. Adv. Learn. Technol., pp. 385–389, 2018.
[5] M. Pohlmann and F. Pinto, “Use Of Virtual Reality And Augmented Reality In Learning Objects : A Case Study For Technical Drawing Teaching,” Int. J. Educ. Res., vol. 7, no. 1, pp. 21–32, 2019.
[6] L. Mekacher, “Augmented Reality ( AR ) And Virtual Reality ( VR ) : The Future Of Interactive Vocational Education,” PUPIL Int. J. Teaching, Educ. Learn., vol. 3, no. 1, pp. 118–129, 2019.
[7] F. Wastono, “Peningkatan Kemandirian Belajar Siswa SMK Pada Mata Diklat Teknologi Mekanik Dengan Metode Problem Based Learning,” J. Pendidik. Teknol. dan Kejuru., vol. 22, no. 4, pp. 396–400, 2015.
[8] D. T. P. Yanto, “Praktikalitas Media Pembelajaran Interaktif pada Proses Pembelajaran Rangkaian Listrik,” INVOTEK J. Inov. Vokasional dan Teknol., vol. 19, no. 1, pp. 75–82, 2019.
[9] S. Sukardi, D. Puyada, R. E. Wulansari, and D. T. P. Yanto, “The Validity of interactive Instructional Media on Electrical Circuits at Vocational High School and Technology,” 2nd INCOTEPD, vol. 2017, pp. 21–22, 2017.
[10] D. T. P. Yanto, S. Sukardi, and D. Puyada, “Effectiveness of Interactive Instructional Media on Electrical Circuits Course : The Effects on Students Cognitive Abilities,” Proc. 4rd Int. Conf. Tech. Vocat. Educ. Train., vol. 2017, pp. 75–80, 2017.
[11] F. Eliza, Hastuti, D. E. Myori, and D. T. P. Yanto, “Peningkatan Kompetensi Guru Sekolah Menengah Kejuruan melalui Pelatihan Software Engineering,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. V, no. 1, pp. 37–45, 2019.
[12] Mulyasa, Guru Dalam Implementasi Kurikulum 2013. Bandung: PT Remaja Rosdakarya, 2015.
[13] W. S. Abu Ahmadi, Psikologi Belajar. Jakarta: Rineka Cipta, 2012.
[14] A. Bandura, “Self-Efficacy : Toward a Unifying Theory of Behavioral Change,” Psychol. Rev., vol. 84, no. 2, pp. 191–215, 1977.
[15] N. N. L. Handayani, “Pengaruh Model Self-Directed Learning Terhadap Kemandirian Dan Prestasi Belajar IPA Siswa Kelas VIII SMP N 3 Singaraja,” J. Ilm. Pendidik. dan Pembelajaran, vol. 1, no. 1, pp. 10–19, 2017.
[16] P. T. Hendrik Lempe Tasaik, “Peran Guru Dalam Meningkatkan Kemandirian Belajar Peserta Didik Kelas V SD Inpres Samberpasi,” Metod. Didakt., vol. 14, no. 1, pp. 45–55, 2018.
[17] S. A. Wijayanto, “Pengaruh Media Pembelajaran Dan Kemandirian Belajar Terhadap Hasil Belajar Sejarah Siswa SMA Pendahuluan,” J. Agastya, vol. 9, no. 2, pp. 172–184, 2019.
[18] D. T. P. Yanto, A. Mawardi, and H. Habibullah, “Penerapan Pembelajaran Menggunakan Media Pembelajaran Berbasis Animasi Flash pada Mata Pelajaran Pengukuran Listrik di SMKN 5 Padang,” Inarxiv, vol. 1, no. 2, 2010.
[19] S. Hamzah and D. Kurniadi, “Pengembangan Media Pembelajaran Perangkat Keras Jaringan Berbasis Augmented Reality Pada Platform Android,” Vokasional Tek. Elektron. dan Inform., vol. 7, no. 3, pp. 1–12, 2019.
[20] Y. Anggraini and I. Sunaryantiningsih, “Pengembangan Media Pembelajaran Pengukuran Listrik Berbasis Augmented Reality pada Mahasiswa Teknik Elektro UNIPMA,” Jupiter (Jurnal Pendidik. Tek. Elektro), vol. 3, no. 1, p. 37, 2018.
[21] Sugiyono, Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif dan R & D. Bandung: Alfabeta, 2014.
[22] Trianto, Model Pembelajaran Terpadu. Jakarta: Bumi Aksara, 2012.
[23] Sugiyono, Metode Penelitian Pendidikan Pendekatan Kuantitatif,. Kualitatif dan R & D. Bandung: Alfabeta, 2009.
[24] S. Sukardi, Metodologi Penelitian Pendidikan, Kompetensi, dan Praktiknya. Jakarta: PT. Bumi Aksara, 2008.
[25] B. S. Cecep Kustandi, Media Pembelajaran Manual dan Digital. Bogor: Ghalia Indonesia, 2011.