Pengembangan Media Pembelajaran Trainer Conveyor Menggunakan Siemens S7-1200 pada Mata kuliah Praktik Sistem Kendali Industri

Authors

  • Aditya Rahman Pendidikan Vokasional Teknik Elektro, Universitas Sultan Ageng Tirtayasa
  • Muhammad Fatkhurrokhman Pendidikan Vokasional Teknik Elektro, Universitas Sultan Ageng Tirtayasa
  • Endi Permata Pendidikan Vokasional Teknik Elektro, Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.24036/jpte.v7i2.724

Keywords:

Learning Media, Conveyor Trainer, Siemens S7-1200 PLC, 4D Model, Learning Media, Conveyor Trainer, Siemens S7-1200 P<C, 4D Model

Abstract

The rapid advancement of industrial automation requires vocational education institutions to provide laboratory facilities relevant to modern manufacturing needs. However, practical learning in Industrial Control Systems courses within the Vocational Electrical Engineering Education study program currently remains abstract due to the absence of real physical conveyor components. This study aims to develop a learning medium in the form of an item-sorting conveyor trainer based on the Siemens S7-1200 PLC, integrated with structured jobsheets. The research method employed is Research and Development (R&D) using the Four-D (4D) development model. The feasibility of the medium was evaluated through instrument validation, material expert validation, media expert validation, and student user-response trials. The results indicate that the conveyor trainer is highly feasible, achieving a material expert validation score of 85%, a media expert score of 83%, and a positive student response rate of 56.5%. The advantage of this device lies in its use of a global standard PLC and the integration of three distinct sensor types for object sorting. Consequently, this learning medium successfully bridges the gap between theory and practice, equipping students with direct practical skills aligned with the modern industrial ecosystem.

References

[1] F. Puspitasari, E. Permata, and M. A. Hamid, “Pengembangan Media Pembelajaran Simulator Lift 4 Lantai Berbasis Plc Pada Mata Kuliah Otomasi Industri,” J. Teknol. Pendidik., vol. 13, no. 2, p. 98, 2020, doi: 10.24114/jtp.v13i2.19345.

[2] M. I. Nari et al., “Development of Mini-Conveyor Trainer Kit based on Modbus Protocol,” Int. J. Technol. Food Agric., vol. 2, no. 1, pp. 35–42, 2025.

[3] Undang-Undang Republik Indonesia Nomor 20 Tahun 2003, “Presiden Republik Indonesia Peraturan Presiden Republik Indonesia,” Demogr. Res., pp. 1–57, 2003.

[4] M. M. Moto, “Pengaruh Penggunaan Media Pembelajaran dalam Dunia Pendidikan,” Indones. J. Prim. Educ., vol. 3, no. 1, pp. 20–28, 2019, doi: 10.17509/ijpe.v3i1.16060.

[5] A. Nurul, “Peran Media Pembelajaran Meningkatkan Hasil Belajar Peserta Didik,” Posiding Semin. Nas. Pendidik. FKIP, vol. 2, no. 1, pp. 586–595, 2019.

[6] N. Liang and J. Xiao, “Design of Automatic Production Line Training System Based on PLC,” Sensors & Transducers, vol. 155, no. 8, pp. 271–277, 2013.

[7] F. Ismail and D. S. Diningrat, “Pengembangan Media Pembelajaran Komik Digital Dilengkapi Video Faktual sebagai Media Pembelajaran Mata Kuliah Kultur Jaringan,” DIAJAR J. Pendidik. dan Pembelajaran, vol. 3, no. 4, pp. 434–440, 2024, doi: 10.54259/diajar.v3i4.3265.

[8] R. Ekawati, E. Permata, M. Fatkhurrokhman, I. Irwanto, and S. Afridah, “Pengembangan Media Pembelajaran Trainer Kit Teknik Digital berbasis Cooperative Learning Approach,” Lect. J. Pendidik., vol. 12, no. 2, pp. 180–193, 2021.

[9] E. S. Romadonah and I. N. Maharani, “Motions Graphic Sebagai Media PembelajaraN,” J. Utile, vol. V, no. Nomor 2, pp. 115–122, 2019.

[10] A. Hanafie, A. C. D. Aksa, N. Alam, and A. Sandy, “Rancang Bangun Sistem Konveyor Penghitung Telur Otomatis,” ILTEK J. Teknol., vol. 15, no. 1, 2020, doi: 10.47398/iltek.v15i01.498.

[11] A. F. Tsaqib, “Penggunaan Media Pembelajaran Jobsheet Pada Mata Pelajaran Gambar Konstruksi Bangunan Untuk Meningkatkan Kemampuan Literasi Konstruksi Pada Siswa Smk Jurusan Teknik Bangunan,” J. Kaji. Pendidik. Tek. Bangunan, vol. 7, no. 1, pp. 1–7, 2021.

[12] S. Sukir, S. Soenarto, and S. Soeharto, “Mengembangkan Kit Alat Peraga Konveyor Untuk Pengendali Logika Terprogram Dalam Pembelajaran Praktikum,” J. Pendidik. Vokasi, vol. 7, no. 3, pp. 329–339, 2017.

[13] R. Fauzan and D. Mulyana, “Pengembangan Trainer Conveyor Menggunakan Outseal Plc Pada Mata Pelajaran Instalasi Motor Listrik,” JEVTE J. Electr. Vocat. Teach. Educ., vol. 2, no. 2, pp. 100–107, 2022, doi: 10.24114/jevte.v2i2.40540.

[14] A. Yani, “Pengembangan Media Pembelajaran Berbasis Miniatur Mesin Conveyor Untuk Praktik Programmable Logic Controller (Plc) Di Smk,” J. Innov. Res. Knowl., vol. 3, no. 09, pp. 2067–2076, 2024.

[15] R. K. Sari, “Penelitian Kepustakaan Dalam Penelitian Pengembangan Pendidikan Bahasa Indonesia,” J. BORNEO Hum., pp. 60–69, 2021.

[16] Fayrus and A. Slamet, Model Penelitian Pengembangan (R n D). 2022.

[17] S. Sugiyono, Metode Penelitian & Pengembangan Research and Development. Sofia Yust. Yogyakarta: Alfabeta, 2022.

[18] R. Rohmad and S. Sarah, Pengembangan Instrumen dan Angket. Yogyakarta: K-Media, 2021.

Downloads

Published

2026-07-18

Issue

Vol. 7 No. 2 (2026): Jurnal Pendidikan Teknik Elektro

Section

Articles

License

Copyright (c) 2026 Aditya Rahman, Muhammad Fatkhurrokhman, Endi Permata

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.